T018 Cheap and High Quality Flood Barriers Rubber Dam Inflatable Water Filled Dam

• Usage: Agricultural
• Material: EPDM
• Service 1: Designing
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: T018
• Service 2: Maintenance & Fixing
• Transport Package: in Roll
• Specification: Height: 0.5-8m, Length: 1-1000m
• Trademark: HY
• Origin: Hebei China
• Production Capacity: 100 Sets Each Month
• Package Size: 50.00cm * 50.00cm * 20.00cm
• Package Gross Weight: 3.000kg

Product Description

T018 Cheap And High Quality Flood Barriers Rubber Dam Inflatable Water Filled Dam

Keywords: inflatable bladder, inflatable dam, rubber dam, water filling dam, air filled dam, shield type dam.

Real Factory, Competitive in Quality and Prices.


Main Advantages of Rubber Dams

• Flexible weir structure, allowing discharge of sediments, debris and ice
• Fully automatic reservoir level control
• Self-acting flood release; the automatic bucket drive lowers the weir without the need for external energy to power mechanical valve drives
• Ideal for creating reservoirs in wide rivers; single spans of up to 100 m are feasible
• Renovation and reconstruction of existiing weir structures, regardless of shape and geometric configuration, factory made as a single unit. On site this ready-made membrane just has to be secured in place by the clamping system
• Absence of mechanical components eliminates corrosion risk
• No lubricants needed - protects the environment
• Low maintenance costs and low operating costs due to minimal energy requirements
• More than 100 examples built since 1991

Available Sizes:  

Height can be designed with a range of 1-8 meters.
Length can be 1000 meters, even longer.

Physical and mechanical properties of water inflatable rubber dam

Item	Unit	Outer layer	Middle layer, inner layer	Cover rubber sheet
Tensile strength at break		MPa	14	12	6
Elongation at break		%	400	400	250
Permanent deformation at break		%	30	30	35
Hardness (shore A)			55-65	50-60	55-65
Brittleness temperature		°C	-30	-30	-30
Hot water aging (100 °C × 96 h)	Tensile strength at break	MPa	12	10	5
	Elongation at break	%	300	300	200
Hot water aging (70 °C × 96 h)	Tensile strength at break	MPa	12	10	5
	Elongation at break	%	300	300	200
	Volume expansion ratio	%	15	15	15
Ozone aging: 10000 pphm, temperature 40 °C, stretching 20%, no cracking		min	120	120	100
Wear loss (akron)		cm^3/1.61 km	1.0	1.0	1.2
Flexibility, no cracking		Ten thousand times	20	20	20

Certificates: